Risk Analysis of Breakwater Caisson Under Wave Attack Using Load Surface Approximation     

Dong Hyawn KIM 《中国海洋工程》2014,(6):739-748

A new load surface based approach to the reliability analysis of caisson-type breakwater is proposed. Uncertainties of the horizontal and vertical wave loads acting on breakwater are considered by using the so-called load surfaces, which can be estimated as functions of wave height, water level, and so on. Then, the first-order reliability method（FORM） can be applied to determine the probability of failure under the wave action. In this way, the reliability analysis of breakwaters with uncertainties both in wave height and in water level is possible. Moreover, the uncertainty in wave breaking can be taken into account by considering a random variable for wave height ratio which relates the significant wave height to the maximum wave height. The proposed approach is applied numerically to the reliability analysis of caisson breakwater under wave attack that may undergo partial or full wave breaking.  相似文献   

Coupled groundwater flow and heat transport simulation for estimating transient aquifer–stream exchange at the lowland River Spree (Germany)          下载免费PDF全文

Gunnar Nützmann  Christian Levers  Jörg Lewandowski 《水文研究》2014,28(13):4078-4090

Subsurface flow and heat transport near Freienbrink, NE Germany, was simulated in order to study groundwater–surface water exchange between a floodplains aquifer and a section of the lowland River Spree and an adjacent oxbow. Groundwater exfiltration was the dominant process, and only fast surface water level rises resulted in temporary infiltration into the aquifer. The main groundwater flow paths are identified based on a 3D groundwater flow model. To estimate mass fluxes across the aquifer–surface water interfaces, a 2D flow and heat transport modelling approach along a transect of 12 piezometers was performed. Results of steady‐state and transient water level simulations show an overall high accuracy with a Spearman coefficient ρ = 0.9996 and root mean square error (RMSE) = 0.008 m. Based on small groundwater flow velocities of about 10^?7 to 10^?6 ms^?1, mean groundwater exfiltration rates of 233 l m^?2 d^?1 are calculated. Short periods of surface water infiltration into the aquifer do not exceed 10 days, and the infiltration rates are in the same range. The heat transport was modelled with slightly less accuracy (ρ = 0.8359 and RMSE = 0.34 °C). In contrast to the predominant groundwater exfiltration, surface water temperatures determine the calculated temperatures in the upper aquifer below both surface water bodies down to 10 m during the whole simulation period. These findings emphasize prevailing of heat conduction over advection in the upper aquifer zones, which seems to be typical for lowland streams with sandy aquifer materials and low hydraulic gradients. Moreover, this study shows the potential of coupled numerical flow and heat transport modelling to understand groundwater–surface water exchange processes in detail. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

冀中坳陷中部现今热岩石圈厚度及地热学意义探讨     

崔悦  朱传庆  邱楠生  唐博宁  郭飒飒 《地质学报》2020,94(7):1960-1969

热岩石圈厚度是研究盆地的构造演化和板块动力学的重要参数,本文通过实测数据构建地壳分层模型,根据热传导的基本原理,计算了冀中坳陷中部的Moho面温度以及热岩石圈厚度,并探讨其地热学意义。结果表明:冀中坳陷中部的Moho面温度分布在500～600℃,西南侧整体温度较东北部高,热岩石圈厚度介于102～122km,其平面展布特征与华北克拉通热岩石圈厚度西厚东薄的特征相吻合,为华北克拉通受太平洋板块西向俯冲导致东部遭受破坏提供了依据,并且较薄的岩石圈使热流更易传导到地壳浅部,成为了该地区热异常的成因背景。  相似文献   

青藏高原东北缘瑞利面波成像：射线理论与程函方程结果的比较     

郝识杰  黄周传  王良书  徐鸣洁  米宁  于大勇 《高校地质学报》2020,26(6):712-720

青藏高原东北缘是青藏高原隆升的前缘地带，其构造变形特征一直是研究的热点。前人在该区域进行过面波成像研究，但不同结果存在较明显的差异，可能与不同成像方法的分辨率有关，此次研究分别使用基于射线的方法和基于程函方程的方法进行了瑞利波相速度成像。笔者对比了20 s、30 s和60 s的成像结果，两种方法的结果表现出相似的速度特征。总体的速度特征与研究区域的主要构造单元分布相吻合，青藏高原东北缘表现出低速异常，鄂尔多斯块体表现出高速异常。在银川河套地堑，基于程函方程的成像在20 s和30 s得到更明显的低速异常，低速异常体的分布与地堑的轮廓吻合更好，说明基于程函方程的方法对数据利用更充分。  相似文献   

典型喀斯特城市的热岛时空变化及其成因分析     

陈炫炽  陈蓉  廖瑶  吴愈锋  王跃跃 《测绘通报》2019,(11):93-97

利用1989、2003、2018年的Landsat影像对安顺市西秀区的地表温度进行反演，分析研究区在30年发展中的热岛时空变化及其成因。使用基于影像的反演算法，结合分类回归树算法进行地表温度的反演，用气象站数据对反演结果进行精度验证，并建立缓冲区对研究区进行相关性分析等定量分析。结果表明：研究区受喀斯特地貌的影响，除主城区外，郊区也存在大量高温区；近30年研究区热效应与不透水面、绿地的面积有极显著相关；1989-2003年研究区城市热岛面积随城市扩张逐渐增大，但2018年主城区城市热岛现象几乎完全消失，排除气象因素和城市形态因子影响的可能后，发现这与安顺市城市绿化的大力进行有密切关系。  相似文献   

2017年西藏米林M_S6.9地震发震构造初探          下载免费PDF全文

王林  田勤俭  李文巧  赵妍  徐岳仁 《地球物理学报》2019,62(7):2549-2566

2017年11月18日在西藏米林发生了M_S6.9地震，目前尚未发现地表破裂带，发震构造尚不明确.震源机制解表明该次地震为逆冲型地震.精定位结果显示余震集中在加拉白垒东北坡上一个NW走向的长约36 km、宽约8 km的狭长条带之内.余震条带的走向及长度严格受到派乡构造岩片NE边界走向及长度的控制，垂直于该条带的地震剖面清晰地揭示出一条倾向NE的低倾角逆冲断层面，结合震源机制解及GPS同震位移场的已有结果，初步推断它可能就是发震断层面.雅鲁藏布江大拐弯上游加拉-米林河段两岸的湖相基座阶地面和山脊线在南迦巴瓦、加拉白垒脚下都发生了倾向SW的翘起变形，发震断层面构成了其上盘加拉白垒、南迦巴瓦强烈隆升区与其下盘地貌发生翘起变形的弱隆升区的分界面，推断加拉白垒峰沿着这一断层面不断地逆冲、隆升，以此来调节其两侧的不均匀挤出，而下盘近断层处的褶皱、拖曳等作用逐渐造成了阶地面、山脊线的翘起、弯曲变形.基于夷平面的区域变形分析，认为雅江缝合带作为主干断裂带从整体上控制着印度板块与欧亚板块在东构造结地区的碰撞-挤压格局.印度板块东北犄角的强烈顶撞引起了东构造结附近强烈的断块运动，嘉黎断裂带北侧的地壳显著增厚，主夷平面随之发生裂解.与此同时，由于碰撞带来的强烈挤压，派乡构造岩片、多雄拉变质穹隆沿着缝合带大拐弯内侧不均匀地挤出，南迦巴瓦、加拉白垒随之隆升.此次的米林地震仅仅是该不均匀挤出过程所引发的一次具体的事件，是派乡构造岩片内部的一条次级断层发生的一次逆冲运动造成的.此外，紧邻此次余震条带的南迦巴瓦NEE边界以及SE边界是一个潜在的地震空区，其未来地震危险性值得关注.  相似文献   

Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales     

Robert I. Ferguson  Richard J. Hardy  Rebecca A. Hodge 《地球表面变化过程与地形》2019,44(12):2437-2449

Many models of incision by bedrock rivers predict water depth and shear stress from discharge; conversely, palaeoflood discharge is sometimes reconstructed from flow depth markers in rock gorges. In both cases, assumptions are made about flow resistance. The depth–discharge relation in a bedrock river must depend on at least two roughness length scales (exposed rock and sediment cover) and possibly a third (sidewalls). A conceptually attractive way to model the depth–discharge relation in such situations is to partition the total shear stress and friction factor, but it is not obvious how to quantify the friction factor for rough walls in a way that can be used in incision process models. We show that a single flow resistance calculation using a spatially averaged roughness length scale closely approximates the partitioning of stress between sediment and rock, and between bed and walls, in idealized scenarios. Both approaches give closer fits to the measured depth–discharge relations in two small bedrock reaches than can be achieved using a fixed value of Manning's n or the Chézy friction factor. Sidewalls that are substantially rougher or smoother than the bed have a significant effect on the partitioning of shear stress between bed and sidewalls. More research is needed on how best to estimate roughness length scales from observable or measurable channel characteristics. © 2019 John Wiley & Sons, Ltd.  相似文献   

一种旋转塑性势面模型及非关联塑性流动法则     

徐日庆  蒋佳琪  冯苏阳  鞠露莹 《岩土力学》2020,41(5):1474-1482

为了较好地描述软土塑性应变发展规律，提出了一种改进的塑性流动模型。该模型采用了与屈服函数形式相同，但具有一定倾角 的塑性势函数。土体在变形过程中，塑性流动方向会依赖于塑性势面的旋转而变化，直至达到破坏状态。通过对常规三轴试验结果的分析可以发现：在剪切过程中，塑性势面旋转角的初值 与终值 较为稳定，不受围压变化影响。在此试验观察基础上，引入了归一化的旋转角参数 以及描述土体应力状态的参数 ，在采用蛋形势函数的情况下二者具有良好的分段线性关系。利用该关系，建立了改进的塑性流动法则，只需要2个额外的模型参数。对所提出的塑性流动模型进行了验证，计算结果表明该模型能较好地反映塑性应变的变化趋势。  相似文献   

Removal of water‐surface reflection effects with a temporal minimum filter for UAV‐based shallow‐water photogrammetry          下载免费PDF全文

I GD Yudha Partama  Ariyo Kanno  Motoyasu Ueda  Yoshihisa Akamatsu  Ryutei Inui  Masahiko Sekine  Koichi Yamamoto  Tsuyoshi Imai  Takaya Higuchi 《地球表面变化过程与地形》2018,43(12):2673-2682

The recent development of structure‐from‐motion (SfM) and multi‐view stereo (MVS) photogrammetry techniques has enabled semi‐automatic high‐resolution bathymetry using aerial images taken by consumer‐grade digital cameras mounted on unmanned aerial vehicles (UAVs). However, the applicability of these techniques is sometimes limited by sun and sky reflections at the water surface, which render the point‐cloud density and accuracy insufficient. In this research, we present a new imaging technique to suppress the effect of these water‐surface reflections. In this technique, we order a drone to take a short video instead of a still picture at each waypoint. We then apply a temporal minimum filter to the video. This filter extracts the smallest RGB values in all the video frames for each pixel, and composes an image with greatly reduced reflection effects. To assess the performance of this technique, we applied it at three small shallow‐water sites. Specifically, we evaluated the effect of the technique on the point cloud density and the accuracy and precision of the photogrammetry. The results showed that the proposed technique achieved a far denser point cloud than the case in which a randomly chosen frame was used for each waypoint, and also showed better overall accuracy and precision in estimating water‐bottom elevation. The effectiveness of this new technique should depend on the surface wave state and sky radiance distribution, and this dependence, as well as the applicability to large areas, should be investigated in future research. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

THE APPLICATION OF MINIATURE UNMANNED AERIAL VEHICLE IN 25 NOVEMBER 2016 ARKETAO M_W6.6 EARTHQUAKE     

FU Bo  LI Zhi-qiang  CHEN Jie  FAN Xi-wei  LI Xiao-li  LI Tao  YAO Yuan  LIU Yao-hui 《地震地质》2018,40(3):672-684

In order to complete the field investigation to the 25 November 2016 Arketao M_W6.6 earthquake, ultra-low altitude remote-sensing data were obtained from miniature unmanned aerial vehicle. The surface rupture surveying has important significance for earthquake research. This paper selects the macro-epicenter of Arketao as the study area. The pictures were obtained with DJI Phantom 3 professional input into the software, the Digital Elevation Model (DEM), Digital Orthophoto Map (DOM) were acquired based on photogrammetry method using the overlapped optical remote-sensing images of UAV. Using these data, we can identify surface ruptures that have vertical dislocation. We selected six feature points and drew the elevation profile. In the elevation profile map, we chose smooth part of the surface rupture sides and obtained the trend line. A stable point in the surface rupture was selected and the abscissa of the point was taken into the equation of two straight lines. Then subtracting the results of the two equations, we can get the vertical dislocation of the surface rupture. On this basis, we chose six feature points and determined their vertical dislocation, which are between 4.4cm and 10.4cm. What's more, taking Bulungkou Xiang in Xinjiang Uygur Autonomous Region for example, we speculated some surface ruptures that have vertical dislocation. It can provide a new method for identifying surface rupture in the field. In addition, we get DEM data of the Bulunkou area where ambient conditions are very poor, by using miniature unmanned aerial vehicle and taking 255 photos. Putting those photos into the EasyUAV software, we got the area digital elevation of 2cm resolution. Comparing these data with RTK data, we summarized some practical problems and solutions in the practical operation and evaluated the accuracy of miniature unmanned aerial vehicle data. The Pearson Correlation Coefficient is 0.996 6. In terms of absolute elevation, the average result of UAV and RTK differs by 156.96m. In terms of relative elevation, the average result of UAV and RTK differs by 9.74m. Compared with the previous test of Pishan County, there is a notable divergence in the results. It shows that the data accuracy will be affected to some extent in the cold weather in high elevations. The specific impact needs further exploration.  相似文献